| SENSOR PROBES |
1) Built_in piezoelectric construction, non-sparking stainless steel construction, coil corded w/BNC connector, extendable from 6" to 12 feet using P/N 8029 & 8023(6") and P/N 8029 & 8049 w/8124(12').
2) Type K surface thermocouple integrally wired to 1250 by coil cord, extendable from 6" to 12 feet using P/N 8023(6") and 8049w/8125.(12')
|
| DISPLAY |
3½ digits, ½" LCD, auto ranged for direct reading, ±1LSB and refresh rates of three per second. "BAT" symbol displays for recharging when low and then blanks to preserve data accuracy. |
| NUMERIC RANGES |
| Acoustic Emission |
: 0.0 to 70.0 decibels (dB) |
| Surface Temperature |
: 0 _ 1500 oF (0 - 816oC) |
| Censorsound™ |
: 0 - 1999 Audible Sound |
| Ultrasound |
: 0 - 19.99 Supersonic sound Heterodyned |
|
| FREQUENCY RANGE |
Acoustic Emission; 20KHz TO 100 KHz, -3 dB points
Censorsound 40 Hz to 14.0 KHz, -3 Db points,
Ultrasonic 22 KHz to 57 KHz TUNABLE, -3 dB points translated to audible range.
|
| TEMPERATURE RANGE |
0o-1500oF (0o- 816oC) [ resolution of 1o] |
| General Accuracy: |
±3% ±2 counts OF READING, operating temperature range of 0o to 50oC, Recalibration interval 1YR. |
| Temperature Accuracy: |
±1oF (±1oC)over range -32oF - 1500oF (0oC to 816oC). |
| AVERAGING |
Depress and hold AVG/PWR button for five seconds to obtain an RMS average of the fluctuating input. On release the instrument reverts back to real time and resets the five minute battery saver circuits. |
| BATTERY SAVER |
Circuit turns instrument off after five minutes of non use. Restart by depressing AVG/PWR button momentarily. |
| BATTERY CONDITION |
Battery condition monitored continuously and displayed "BAT" symbol when charging is recommended. On continued use the circuit will BLANK the display preventing degraded data from being taken. |
| SIGNAL OUTPUT |
0 to 2.0 VAC full scale for function selected. Source impedance: 1.0K ohms. |
| HEADPHONE OUTPUT |
0 to 1.1 Volt RMS into <100 Ohm, current limited to .035 A. load, 3mm stereo jack connector. |
| POWER SOURCE |
Rechargeable: AA nickel cadmium rechargeable batteries. Operating time 48 hrs. continuous depending on headphone volume setting. A battery saver circuit turns instrument off after five minutes of non_use. |
OPERATING
CONDITIONS |
Temperature: 32 oF to 122 oF (0o-50oC)
CONDITIONS Humidity: 95% RH non_condensing.
Storage:14oF to 140oF. (-10oC to +60oC).
|
| PHYSICAL |
5¼"L x 5 1/16"W x 2¼"D (13.3cm x 12.8cm x 5.7cm) exclusive of probes.
Weight is 2.0 lb (930 g).
|
|
STANDARD EQUIPMENT |
| Part NO. |
| Opt12.................................. |
| 8002.................................... |
| 8003.................................... |
| 8008.................................... |
| 8012.................................... |
| 8020.................................... |
| 8029.................................... |
| 8033.................................... |
| 8037.................................... |
| 8053.................................... |
|
| Description |
| Buffered AC Volt output of sensor, BNC conn. |
| Temperature probe with cord, integral connection. |
| 2" Heavy Duty NYLON WEB Belt. |
| Battery charger. |
| Accelerometer with 4'(1.22M)coil cord terminating with a BNC connection. |
| Leather instrument case with three pockets for probes and tools. |
| Calibrated Spring handle. |
| Large carrying/accessory case. |
| 1250 Instruction Manual. |
| Headphone for 1200 Energy Monitor, 26dB ambient attenuation, head strap type. |
|
|
ACCESSORIES AND OPTIONS AVAILABLE |
|
| Opt11 |
DC Volt output of selected function in lieu of Opt12; BNC connector |
| Opt17 |
Environmentally Sealed case |
| Opt29 |
Convert Standard integral 1250 Temp. Probe 8002 to mini in-line connector type
w/6" extension fixed to instrument. Use with 8125 and 8049 |
| 8010 |
Temperature probe as 8002 with MINI-PLUG, male connection |
| 8023 |
Probe extension handle 6" (15.24cm) use w/8010,8002,8029 |
| 8049 |
Telescoping Fiberglass Sensor Probe extension 4' to 12'(1.22M to 3.66M) |
| 8125 |
Type K Coil Cord, 10Feet Long (Two Foot Retracted) w/ M-F connectors for
8049 extension |
| 8124 |
Coax Coil cord by 12foot(3.66M) w/ BNC Connectors, use w/8049 |
|
|
NOTICE:
DUE TO CONTINUED PRODUCT IMPROVEMENT, DATAMITE TECHNOLOGIES RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
|